|
| 1 |
Before fixing, the tiles must be soaked in water about an hour, soaking of tiles is not required in case of fixing with chemical adhesive. |
| 2 |
The wall surface is to be roughed plastered using mortar composed of one part of cement and three part of sand on the rough plastered surface, a coat of very thin cement slurry should be applied by brush at the time of fixing the tiles. |
| 3 |
Do not use grade 53 cement for the tiles lying. |
| 4 |
The mortar is to be spread on the back side of the tiles, use cement and sand mortar in the ratio of 1:2, do not use more cement otherwise it may lead to crack on the tiles, at any later date due to development of stress underneath for which company will not be responsible. |
|
New Products
